Technical Specifications
Category Specification
Oscillator Type PLL Synthesized Control Oscillator
RF Spectrum Channel Bands UHF Tuning Frequency Space (Group A: 556.71 MHz – 575.98 MHz / Group B: 576.39 MHz – 595.66 MHz)
Selectable Channels 48 Independent Wireless Channels
Operational Range Reach Up to 100 meters (328 feet) line-of-sight without physical obstacles
System Frequency Response 40 Hz to 18 kHz ($\pm 3\text{ dB}$)

Technical Specifications
Category Specification
Acoustic Design Aerodynamic Zepplin/Blimp Shielding Matrix with high acoustic transparency
Microphone Compatibility Shotgun microphones with a length up to 320mm (12.6 inches)
Microphone Diameter Range 19mm to 22mm diameter capsules
Internal Isolation System Adjustable elastic elastomer O-ring shock mount suspension
Integrated Cabling Internal ultra-flexible coiled 3-pin XLR female to base XLR male tail cable
Handle Form Factor Ergonomic handle pistol grip with 3/8″-16 female boompole mount base
Angle Adjustment 180° articulating friction tilt joint with heavy-duty locking lever

Feature Specification
Model SKU Sennheiser MKE 200 (Mobile Shotgun Series) | SENMKE200
Hardware Condition Brand New (Factory Sealed Box Packaging)
Acoustic Operating Principle Pre-Polarized Condenser Transducer Core
Acoustic Pick-Up Pattern Supercardioid (Highly Directional Forward Isolation)
Frequency Response Range 40 Hz to 20,000 Hz Comprehensive Acoustic Capture
Maximum Sound Pressure Level 120 dB SPL (Handles Loud Urban Street Environments Safely)
Equivalent Noise Level 20 dB V(A) Low Internal Self-Hiss Grid
System Power Requirements Plug-In Power (Battery-Free Architecture) | 2V to 10V Required
Mechanical Shock-Mounting Built-In Internal Suspension Vibration Isolation Matrix
Integrated Wind Protection Internal Acoustic Mesh Layer (Includes External Furry Windshield)

Technical Specifications
Category Specification
Transmission Range Up to 300 feet ($91.44\text{ m}$) Line-of-Sight (LOS)
System Signal Latency Ultra-low propagation delay of approximately 0.07 seconds (70ms)
Video Input Interface 1x HDMI Type-A Input Port
Supported Input Formats 1080p (60/59.94/50/30/29.97/25/24/23.98 fps), 1080i (60/50 fps), 720p (60/50 fps)
Wireless Frequency Carrier $5\text{ GHz}$ spectral band with active Intelligent Channel Selection
Multi-Device Capacity 1 TX to 3 Apps: Supports simultaneous wireless feeds to 3 mobile devices

Technical Specifications
Category Specification
System Architecture Analog UHF / PLL Synthesized Control Oscillator
RF Frequency Range Channel Group A: 576.4 MHz – 599.9 MHz | Channel Group B: 568.6 MHz – 592.1 MHz
Selectable Channels 48 Independent Channels
Maximum Operating Range Up to 100 meters (328 feet) line-of-sight without physical barriers
Frequency Response 40 Hz to 18 kHz ($\pm 3\text{ dB}$)

Feature Detailed Specification
Model Number UC1118
Video Input 1 × 3G-SDI / HD-SDI / SD-SDI (75Ω BNC Female Terminal)
Primary Digital Output 1 × USB 3.1 Gen 1 Type-C (Up to 200MB/s uncompressed data bandwidth)
Analog Audio Input 1 × 3.5mm TRS Stereo Line-In
Input Signal Auto-Detection Automatically senses and adjusts to incoming SDI video formats and frame rates
Supported SDI Formats

1080p: 60/59.94/50/30/29.97/25/24 fps

1080i: 60/59.94/50 fps; 720p: 60/50/30/25 fps; 576i / 480i

USB Captured Resolution Up to 1920 × 1080p at 60fps (YUV color space output supported)

Technical Specifications
Category Specification
Transmission Range Up to 350 feet ($100\text{m}$) Line-of-Sight (LOS)
System Signal Latency Low-latency monitoring of approximately 0.065 seconds (65ms)
Video Input Format Up to 4K UHD ($3840 \times 2160$) @ 30/25/24 fps via HDMI
Wireless Frequency 5 GHz Wireless Band with dynamic channel scanning
Hardwired Connectivity 1x HDMI Input, 1x USB-C (Wired phone monitoring/Data loop), 1x USB-C Camera Interface